The Burst Tester is used as a multi-directional test to identify failure in the direction showing least resistance. This test shows the physical strength and fiber bond. Different models are available for paper, board or textile. This instrument is also used for other applications such as plastic, rubber, aluminum and felts. The sample is pneumatically clamped, the rubber membrane is pushed upwards by hydraulics. The force at fracture is recorded.

The Crush Test is designed as a robust, easy to use instrument. Exactly what you need when performing crush tests. The Crush Tester is suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics. The special sample holders extend the instrument’s possibilities. The accuracy is achieved with a precision load cell, which is even accurate at low force values.

The model 49-56 Digital Micrometer combines unmatched accuracy and resolution with a modern contemporary look. The Micrometer can be configured to meet ISO, ASTM, TAPPI, EDANA or other international specifications.

Insert Your Sample and Test. The Horizontal Tensile Tester tests the tensile strength and elongation of a sample. After placing the sample the sensor detects the sample and the test starts. Special guides are supplied to center the sample correctly. The guides can be replaced when another test width is required. The wide workbench enables you to easily perform your tests. The auto detect option leaves your hands free to slide in your sample. The touchscreen has clear buttons makes navigation quick and easily. As an option, the instrument can be adapted for wet test according to ISO 12625-5.

Test Results. After the tests the values are shown in a graph and in statistical values. The main results are force, strain, T.E.A, elongation and force, and there is a wide range of other results. The instrument is equipped with an overload protection and can be supplied with a 50, 100, 250, 500 or 1,000N load cell.

Small and Easy to Handle. The PGX+ measures contact angle (dynamic and static), surface tension, and surface energy. The PGX+ makes a drop in µl according to the size that is set. The drop is automatically released and 80 images per second are made. The instrument is used for paper & board, solar cell panels, windshields, metal cylinders and similar surfaces. For most tests deionized water is used, however using other liquids is also possible. Contact us if you want to use any other liquids.

Test Results. During testing the instrument is connected to the special PC software. The software gives you an easy overview of the possible tests. During the test the data transferred to the computer. The pictures taken and the results can be stored and analyzed. Thanks to the direct feedback, adjustments to improve the results can easily be made.

Test and evaluate the strength of your paper and board samples with confidence using our industry-leading short span compression tester.

The LM20 contains an intensifier pump designed to supply the desired pressure at a constant rate to the product stream. As the pump travels through its pressure stroke, it drives the product at constant pressure through precisely defined fixed-geometry microchannels within the interaction chamber.

As a result, the product stream accelerates to high velocities, creating shear rates within the product stream that are orders of magnitude greater than any other conventional means. All of the product experiences identical processing conditions, producing the desired results, including: uniform particle and droplet size reduction (often submicron), deagglomeration and high-yield cell disruption.

The LV1 benchtop was developed as a result of customer demand to bring Microfluidizer quality nanotechnology processing to the milliliter scale with applications in the pharmaceutical, biotechnology, chemical, nutraceutical/food, cosmetic and energy industries: Academic and commercial sectors, Drug discovery, Adme Tox, basic research and development, Proteomics and genomics applications.

As leading pharmaceutical companies continue to explore the benefits of continuous manufacturing and bottom-up nanoparticle creation, Microfluidics’ PureNano Continuous Crystallizer is being used to create stabile inhalable formulations, improve the bioavailability of antibiotics and target delivery of novel cancer treatments, among other possibilities.

Microfluidizer homogenizers combine superior results with easy handling and small footprint.

The series of air-driven homogenizers are lightweigh and easy-to-use and are suitable for batch and continuous flow processing, often used for emulsions, dispersions and liposomes in pharmaceutical, cosmetic and food and beverage applications. They feature in line cleaning, a pressure gauge, and a small footprint for bench use (or under hood).

Microfluidics LM10 Microfluidizer® High Pressure Lab Homogenizer is a unique solution to maintaining consistent process pressure, ensures 100% of your material gets exactly the same treatment.

The new LM10 Microfluidizer is a digitally controlled lab unit for small sample material processing. The LM10 converts pressure energy more efficiently into shear and impact forces, attaining targeted size reduction at lower peak pressure, which results in less sample temperature rise during processing.

M-110EH-30 Electric-Hydraulic Laboratory Microfluidizer Processor for Continuous High Shear Fluid Processing. The M-110EH-30 has been designed to reliably achieve continuous operating pressures to 30,000 psi. The processor maximizes the energy-per-unit fluid volume, resulting in uniform submicron particle and droplet sizes.

M-110P Laboratory Model For Continuous High Shear Fluid Processing The M-110P Microfluidizer is the industry’s leading high shear fluid processor with simplified usage controls, cooler operation, and reduced weight and noise.

Microfluidizer Processor for Continuous High Shear Fluid Processing in Industrial Environments. Microfluidics produces patented Microfluidizer processor equipment with high-pressure, fixed-geometry interaction chambers that impart high shear rates to product formulations. The M-700 generates up to 30,000 psi operating pressure (40,000 psi available as special option) for premium results at an affordable cost.