Tested and certified independently by TÜV-SÜD: LABEX®-Laboratory Freezers with re-circulating air cooling are intrinsically safe according to the ATEX 95 directive. Each component in the interior compartment (ventilators, sensors) is particularly shielded to avoid sparks even when malfunction occur. Your advantage: Complete explosion-proofing and maximum temperature consistency.

All-glass assemblies are ideal for biodiesel testing, aggressive solvents, and applications where you need to minimize the materials that contact sample or filtrate. Filter holder mounts on filtration flask using a ground glass joint; order standard 47-mm filter paper separately below.

For determining the material loss by gas-entrained solid particle impingement erosion with jetnozzle type erosion equipment. It can be used in the laboratory to measure the solid particle erosion of different materials and has been used as a screening test for ranking solid particle erosion rates of materials in simulated service environments

The Aquamax TAN titrator is easy to operate: simply calibrate, run a blank, select the correct preprogrammed TAN analysis, and the titrator performs the analysis. Intuitive function guide display walks you through operation. Results are displayed on screen in units of KOH/g and are also stored via internal data logger. Flexible data management options allow for export of readings to a PC or printer. TiCOM software (order separately below) allows viewing and printing of sample input, blank, and titration measurement data. Optional thermal printer accessory allows for the printing of results data. Order separately below.

The Koehler Benchtop EDXRF Elemental Analyzer can be used to determine the amount of sulfur in petroleum and petroleum products that are single-phase. This product may be used to determine the amount of lead in gasoline as well.

Baths feature PID microprocessor controller to deliver precise temperature control, with ASTM specified tolerances throughout the operating temperature range. Dual digital displays show set point time and actual temperature.

Accelerated Laboratory and Field Procedure for the determination of corrosion of iron, in the presence of water, on samples such as gasoline and gasoline blended with 10% ethanol, E10 (Specification D4814); gasolineblend components (except butane); diesel fuel and biodiesel B5, except Grade No. 4-D (Specification D975); biodiesel B6 to B20 (Specification D7467); diesel-blend component such as light cycle-oil; No.1 fuel oil, No.2 fuel oil (Specification D396); aviation turbine fuel (Specification D1655).

The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel pressure vessel during testing.

Consists of two heat-transfer corrosion cells with temperature and pressure controls for evaluating engine coolant samples in accordance with ASTM D4340. Maintains aluminum alloy specimens at constant temperature in the presence of 500 mL samples. Each corrosion cell includes a borosilicate glass test cell, heat transfer bar, aluminum test specimen with thermocouple port, Type J thermocouple, 950W band heater, pressure gauge, pressure relief valve, stainless steel end plates with support rods, fill plug and o-rings, and acrylic safety shields. Digital temperature controllers maintain specimens at temperatures of up to 210 ± 1°C throughout the test period. Test cells are mounted on a finished steel base. Controls are housed in a separate finished steel cabinet.

Constant temperature apparatus rotates copper and lead test panels in lubricant samples to determine corrosiveness to lead per FTM specifications. Panels are rotated at 600rpm in samples maintained at 163°C (325°F) and aerated at 0.94L/min. (2.0 Cu. ft./hr.). Test panel shafts ride on ball bearing spindles driven by a 1⁄15hp motor.